Aaa Group Server - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

aaa group server

aaa group server GROUP-NAME
no aaa group server GROUP-NAME
Syntax Description
GROUP-NAME
Default
Command Mode
Usage Guideline
Example
Switch(config)#aaa group server group1
Switch(config-aaa-groug-server)# server radius 172.19.10.100 key 12345678
Switch(config-aaa-group-server)# server radius 172.19.10.200 key 12345678
Switch(config-aaa-group-server)# end
Switch#
CLI Reference Guide
Use the aaa group server command to enter AAA group server mode and identify
AAA server groups used for AAA authentication. In AAA group server mode
server hosts are grouped into distinct lists and distinct methods.
To remove a group server from the configuration list, use the no aaa group server
form of this command.
Character string used to name the group of servers used for group server
method AAA authentication. The group name can be up to 32 characters in
length.
There is no aaa group server.
Global configuration at privilege level 15
The AAA group server method is defined for AAA authenticatication for user login
or configuration. The aaa authentication command is used to define the group
server method and specify the AAA server group.
Use aaa group server command to enter AAA group server mode. If the group
name specified does not exist, the switch creates the new group. Once in AAA
group server mode, use the server command to define and configure servers
added to the group.
The following example shows the network access server configured to recognize
two RADIUS host entries. The second host entry configured acts as fail-over
backup to the first one. (The RADIUS host entries are tried in the order in which
they are configured.)
Verify the settings by entering the show aaa group server command.
aaa group server
30