Ipv6 Nd Other-Config-Flag - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ipv6 nd other-config-flag

ipv6 nd other-config-flag
no ipv6 nd other-config-flag
Syntax
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # configure terminal
Switch (config) # interface vlan1
Switch (config-if) # ipv6 nd other-config-flag
Switch (config-if) #
CLI Reference Guide
This command is used to turn on the IPv6 RA (router advertisement) other
configure flag incidence per interface on this switch. The no form of this
command turns off this flag.
None
other configure flag: off
VLAN interface configuration
The VLAN interface must be created first before this command can be used.
This example shows how to configure IPv6 other configure flag incidence:
ipv6 nd other-config-flag
333