Dos_Prevention Action - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

dos_prevention action

dos_prevention action {trap_log }
no dos_prevention action {trap_log}
Syntax Description
action [ACTION]
Default
Command Mode
Usage Guideline
Examples
Switch# dos_prevention action trap_log
Switch# no dos_prevention action trap_log
CLI Reference Guide
Use this command to specify the action to perform when a DoS attack occurs
Specify the action the device should take when an attacking event occurs. User
can specify multiple actions. The no form of this command can remove specific
actions or all actions. By default drop is enabled and cannot be disabled or
enabled by user.
trap_log
The device can be configured to add log or send trap when an attack even
happens. When an attacking event occurs continuously, the log or trap will be
triggered once every 5 minutes.
None
Global configuration
Used to configure actions the device should take when attacking packets
received.
The following example shows how to configure for enable action trap_log.
The following example shows how to remove action trap_log.
dos_prevention action
155