Command Prompt - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

command prompt

command prompt [level | no-level] [string STRING | product-name | system-name]
Syntax Description
level
no-level
string STRING
product-name
system-name
Default
Command Mode
Usage Guideline
Examples
DGS-6600:15# command prompt system-name
switch:15#
switch:15# command prompt
DGS-6600:15#
CLI Reference Guide
Use this command to change the device cli prompt to, for example: the product
name, system name, or other user-defined strings. The command can also
specify whether to display the current privilege level in the prompt.
(Optional) The privilege level information is appended to prompt name.
(Optional) No privilege level information is appended to prompt name.
(Optional) Specifies the user-defined prompt. The valid length is 1-8 characters.
The syntax is a user-defined string.
(Optional) Use the product name as the prompt name
(Optional) Use the system name (as defined in SNMP System group MIB) as the
prompt name.
product-name with privilege level
Privileged EXEC
The prompt refers to the string that appears indicatng to a user to input a
command. It consists of two parts. The first part is the prompt name. The second
part is the privileged level.
Using this command, the user can change the prompt to use either the product
name or system name and specify whether or not to display the privilege level in
the prompt
Either one or both settings can be changed. If the user selects to use the product
name or the system name as the prompt, only the first 8 characters are taken.
The prompt will be changed immediately after the command is executed.
This example shows how to change the prompt to use the system name.
The following example shows how to set the command prompt back to default
setting: (product name and privilege level).
command prompt
121