Based-On User-Class - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

based-on user-class

based-on user-class {hex HEXADECIMAL |string STRING}
no based-on user-class {hex HEXADECIMAL |string STRING}
Syntax Description
HEXADECIMAL
STRING
Default
Command Mode
Usage Guideline
Examples
switch(config)#ip dhcp pool pool1
switch(config-dhcp)#based-on user-class string alpha
switch(config)#ip dhcp pool pool1
switch(config-dhcp)#based-on user-class hex 0x8080
CLI Reference Guide
This command is used so that DHCP administrators can define specific user
class identifiers to convey information about a client's software configuration or
about its user's preferences. Use the no form of the command to remove the
related setting rule.
A leading string, 0x has to indicated and then a following hexadecimal sequence
must be entered. The maximum length is 128 bytes.
Displayable string but no spaces are allowed. The maximum length is up to 64
bytes.
None
DHCP pool configuration
This command is used to create the address binding rule for the DHCP address
pool. One user class is allowed in one DHCP address pool. Use the no form of
the command to remove user-class rule.
This command will be combined using logical AND operations with the other
rules set by all the other based-on commands. For example, if the first rule is
based-on user-class alpha and there is another based-on c-vid 200 command,
the address pool will only assign an IP address to the client which has C-
VID=200 and user class as alpha.
The following sets a rule used for IP address assignment based on the user class
alpha from DHCP address pool1.
The following sets a rule used for IP address assignment based on the user class
0x8080 from DHCP address pool1.
based-on user-class
65