D-Link DGS-6600-48T Cli Reference Manual page 619

DGS-6604 m
Field
Subnet
Lease
Accept client ID
Accept relay agent
Domain name
Next server
Default router
DNS server
NetBIOS node type
NetBIOS scpoe ID
WINS server
Based-on mac-address
Based-on client ID
Based-on C-VID
Based-on S-VID
Based-on interface-ip-address
Based-on relay-ip-address
Based-on vendor-class
Based-on user-class
Number of leased address
Number of conflict addresses
CLI Reference Guide
Description
The bit combination with the address of the DHCP address pool
The duration of the lease for an IP address
To validate the DHCP Client Identifier value sent by the client or not
Accept DHCP packet contains option82 or not.
This control can be one of the following configurations:
Remote-ID & Circuit-ID,
Remote ID
Circuit-ID
No.
The domain name for DHCP clientBoot fileThe name of the default
boot image for a Dynamic Host Configuration Protocol (DHCP)
client
The configured IP addresses of next-server
The default router list for a DHCP client
The IP address list of DNS server available to DHCP clients.
the NetBIOS node type
the NetBIOS scope id
The IP address of WINS server
The address binding rule based on MAC
The address binding rule based on Client ID
The address binding rule based on customer vlan id
The address binding rule based on service provider vlan id
The address binding rule based on ingress interface IP
The address binding rule based on IP address of relay agent
The address binding rule based on vendor class (option60)
The address binding rule based on user class (option77)
The number of addresses has been leased .
The number of addresses are conflict with other clients.
show ip dhcp pool
609