Show Erps Domain - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show erps domain

show erps domain [DOMAIN-NAME]
Syntax Description
DOMAIN-NAME
Default
Command Mode
Usage Guideline
Example
Switch# show erps domain
ERPS is globally disabled
Switch#
CLI Reference Guide
The show erps domain command is used to display information of all created
ERPS domains.
Specifies the name of ERPS domain with a maximum of 32 characters. (Only
allow character set: '0-9'. 'a-z', 'A-Z' '-')
Not applicable
EXEC mode or any configuration mode
This command displays brief instance information of all created ERP instances in
an ERPS domain on a device.
The following example displays instance information of all created ERPS
domains when ERPS is globally disabled:
The following example displays instance information of all created ERPS
domains:
show erps domain
777