Spanning-Tree ( Global Configuration) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m
spanning-tree ( Global configuration )
spanning-tree
no spanning-tree
Syntax
Default
Command Mode
Usage Guideline
Example
Switch(config)# spanning-tree
Switch(config)#
CLI Reference Guide
Use this command to enable STP mode. Use the no form of the command to
disable STP.
None
Disable
Global configuration
When the no spanning-tree command is used globally to disable STP, an STP
BPDU will be treated as a normal multicast packet and it will be flooded to the
other VLAN member ports.
This example shows how to enable STP and MSTP mode as the default mode.
Verify the settings by entering the show spanning-tree command.
spanning-tree ( Global configuration )
840