Ipv6 Nd Ra-Interval - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ipv6 nd ra-interval

ipv6 nd ra-interval <4-1800> [<3-1350>]
no ipv6 nd ra-interval
Syntax Description
<4-1800>
<3-1350>
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # configure terminal
Switch (config) # interface vlan1
Switch (config-if) # ipv6 nd ra-interval 1500 1000
Switch (config-if) #
CLI Reference Guide
This command is used to configure the IPv6 RA (router advertisement) interval
timer for an interface of this switch. The no form of this command sets the lifetime
to the default value.
Maximum interval value in seconds.
Minimum interval value in seconds.
Must be smaller than the maximaum value * 0.75
<4-1800>: 600
<3-1350>: 198
VLAN interface configuration
The VLAN interface must be created first before this command can be used. If
the minimum interval value is not configured, the minimum interval value will be
automatically assigned per the following rules.
1.If maximum timer >= 9 seconds, then it is configured to the maximum value *
0.33.
2.If maximum timer < 9 seconds, then it is configured to the maximum value.
This example shows how to configure the IPv6 RA interval timer setting:
ipv6 nd ra-interval
335