D-Link DGS-6600-48T Cli Reference Manual page 576

DGS-6604 m
Switch> show channel-group channel detail
S - Device is sending Slow LACPDUs
A - Device is in active mode.
LACP state:
bndl: Port is attached to an aggregator and bundled with other ports.
hot-sby: Port is in a hot-standby state.
indep: Port is in an independent state(not bundled but able to switch
data
traffic)
down: Port is down.
Channel Group 1
Member Ports: 2, Maxports = 16, Protocol: LACP
Port Flags
-------------------------------------------------
eth3.10 SA
eth3.11 SA
Channel Group 2
Member Ports: 2, Maxports = 8, Protocol: Static
LACP
Port State
-----------------
eth3.8 bndl
eth3.9 down
Switch>
CLI Reference Guide
This example shows how to display the detailed information of all port-channels.
LACP
State
bndl
bndl
F - Device is sending fast LACPDU
P - Device is in passive mode.
Port Port
Priority Number
32768 10
32768 11
show channel-group
566