Ip Igmp Snooping Immediate-Leave - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip igmp snooping immediate-leave

ip igmp snooping immediate-leave
no ip igmp snooping immediate-leave
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# interface vlan1
Switch(config-if)#ip igmp snooping immediate-leave
Switch(config-if)# end
CLI Reference Guide
Use this command to configure the IGMP Snooping immediate-leave function
on VLAN interfaces. Use no ip igmp snooping immediate-leave to disable the
immediate-leave function on the specified VLAN.
None
Disabled
VLAN Interface configuration
The ip igmp snooping immediate-leave command allows IGMP Snooping
membership of an interface to be removed immediately without any further
confirmation mechanism (such as time out) when the interface receives an IGMP
leave message from the IGMP client.
This example shows how to enable IGMP Snooping immediate-leave on VLAN 1.
Verfiy the settings by entering the show ip igmp snooping command.
ip igmp snooping immediate-leave
266