D-Link DGS-6600-48T Cli Reference Manual page 686

DGS-6604 m
Field
[160/5]
via 10.119.254.6
0DT0H0M44S
Vlan2
Total Entries :
Switch# show ip route
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default
C 10.0.0.0/8 is directly connected, vlan10
O 10.50.71.253/32 [110/0] is a summary, Null, 0DT1H5M46S
C 11.0.0.0/8 is directly connected, vlan110
O E1 11.0.1.0/24 [110/1] via 11.50.71.200, vlan110, 0DT1H4M47S
C 12.0.0.0/8 is directly connected, vlan111
C 20.0.0.0/8 is directly connected, vlan111
O E1 20.0.1.0/24 [110/1] via 11.50.71.200, vlan110, 0DT1H4M47S
O IA 50.0.0.0/8 [110/2] via 10.50.71.253, vlan10, 0DT1H3M58S
B 121.0.0.0/24 [20/0] via 10.50.71.200, vlan10, 0DT1H5M35S
B 121.0.1.0/24 [20/0] via 10.50.71.200, vlan10, 0DT1H5M35S
B 121.0.2.0/24 [20/0] via 10.50.71.200, vlan10, 0DT1H5M35S
S 160.0.0.0/8 [1/0] via 10.50.71.200, vlan10
Total Entries: 12 entries, 12 routes
CLI Reference Guide
Description
The first number in the brackets is the administrative distance of the information
source; the second number is the metric for the route.
Specifies the address of the next router to the remote network.
Specifies the last time the route was updated.
Specifies the interface through which the specified network can be reached.
Displays the the total number of entries, and the total number of routes.
The following is sample output from the show ip route command when entered
without an address:
show ip route
676