DGS-6604
m
poe port description
poe port description TEXT
no poe port description
Syntax Description
description
Default
Command Mode
Usage Guideline
Example
Switch(config)# interface eth3.1
Switch(config-if)# poe port description For VOIP usage
CLI Reference Guide
Use the poe port description command to configure the PoE port specific
description. Use no form of this command to clear the existed description.
String that describes the PoE ports specific information. The maximum length is
128 characters. The syntax is a general string that allows space.
The default value of this description is a zero-length string.
Interface configuration.
This command could be used to configure a per-port description to indicate the
type of powered device that is connected to the port.
This example shows how to configure the PoE port description.
poe port description
468