Show Ipv6 Dhcp Relay Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ipv6 dhcp relay interface

show ipv6 dhcp relay interface VLAN-interface
Syntax Description
VLAN-interface
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # show ipv6 dhcp relay interface vlan1
Listen interface name: vlan1
Sever Addsess FE80::2:3
Destination interface name: vlan2
CLI Reference Guide
These commands are used to display DHCP relay information.
Specific VLAN interface name.
None
User EXEC or any configuration mode
The show ipv6 dhcp relay command shows the DHCP for IPv6 relay
configuration and running information of the specified VLAN interface.
The following example shows the DHCPv6 client for interface vlan1, when vlan1
DHCPv6 relay enabled
show ipv6 dhcp relay interface
684