Drum Assembly - Toro Greensmaster eFlex 1021 Service Manual

Drum Assembly

g335443
1. Transmission gear box assembly
2. Traction drum
3. Shoulder bolt (3 each)
4. RH hex shaft
5. Drum drive gear box assembly
Removing the Drum Assembly
Traction and Reel Drive Systems: Service and Repairs
6. Drive tube
7. Frame assembly
8. Shoulder bolt
9. Nut
10. Washer
Note: Refer to Figure 21
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Remove the LH and RH drum drive gear box assemblies (item 5 in
21); refer to Removing the Drum Drive Gear Box Assembly (page
4. Remove the traction drum (2) from the frame assembly (7).
Figure 21
11.
12.
13.
during this procedure.
FF
Disconnecting and Connecting the
5–3).
Page 4–18
Splined coupler
Truss screw
LH hex shaft
position, park the
ISENGAGE
, and remove the key; refer to
Greensmaster
20248SL Rev C
Figure
4–12).
® eFlex 1021