Infocenter Display - Toro Greensmaster eFlex 1021 Service Manual

InfoCenter Display

Electrical System: Electrical System Operation
g338445
1. Handle
The InfoCenter display used on your Greensmaster eFlex is an LCD device
that is located on the handle console
information to the operator during the operation of the machine, provides
electrical system diagnostic assistance for the technicians, and allows inputs
for the adjustable machine settings.
Power for the InfoCenter is available when energized by the TEC (the key
switch is in the ON position). A CAN-bus system involving the TEC, electric
motor controller, and lithium-ion battery pack provides necessary machine
communication for the InfoCenter operation.
Note: Icons that are used on the InfoCenter display are identified in the Traction
Unit Operator's Manual.
Note: If the InfoCenter display is replaced for any reason, the machine software
must be updated; contact an Authorized Toro Distributor for assistance.
Figure 35
2. InfoCenter display
(Figure 35). The InfoCenter provides
Page 5–10 Greensmaster ® eFlex 1021
20248SL Rev C