Adjustments; Adjusting The Reel Drive Belt - Toro Greensmaster eFlex 1021 Service Manual

Adjustments

Adjusting the Reel Drive Belt

g312311
1. Reel drive housing
2. Reel drive belt
3. Idler arm
Greensmaster ® eFlex 1021
20248SL Rev C
4. Carriage bolt
5. Bolt Gasket
6. Reel drive cover
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Remove the 4 socket head screws (7) that secure the reel drive cover (6)
to the reel drive housing (1), and remove the cover to expose the reel drive
belt (2).
4. Check the tension of the belt (item 2 in
between pulleys with 18 to 22 N (4 to 5 lbs) of force. If the belt deflects 6.35
mm (0.25 inch), belt tension is correct - continue operation. If belt tension
is not correct, proceed to next step.
Figure 12
FF
Disconnecting and Connecting the
5–3).
Figure
Page 4–3 Traction and Reel Drive Systems: Adjustments
7. Socket head screw (4 each)
position, park the
ISENGAGE
, and remove the key; refer to
12) by pressing it at mid span