Toro Greensmaster eFlex 1021 Service Manual page 206

Removing the Gearbox Assembly (continued)
Universal Groomer (Optional): Service and Repairs
g395722
1. Fill/drain plug
2. Gasket
3. Thrust washer
4. Driver gear
5. Retaining ring
6. Damaged drive shaft
7. Gearbox housing
B. Remove the drain/fill plug from the bottom of the gearbox, and drain
the oil.
C. Remove the 4 socket-head screws that secure the gearbox cover to the
gearbox housing, and cover. Remove and discard the cover gasket.
D. Remove the thrust washer, sun gear, and ring gear from the gearbox
housing.
E. Remove the driven gear from the drive shaft and planet gears from the
pins on the gearbox housing.
F. Remove the retaining ring from the drive shaft.
G. Remove the gearbox housing assembly from the drive shaft.
H. Tip up the cutting unit to access the bottom of the reel.
Figure 123
8. Planetary gear and bushing (3 each)
9. Ring gear
10. O-ring
11. Sun gear
12. 2-lug gearbox cover
13. Single lug gearbox cover
14. Socket head screw (4 each)
Page 8–8 Greensmaster ® eFlex 1021
20248SL Rev C