Kickstand - Toro Greensmaster eFlex 1021 Service Manual

Kickstand

g394087
1. Lower handle assembly
2. Bolt (2 each)
3. Frame assembly
4. Nut (3 each)
5. E-ring
6. Compression spring
7. Kickstand lock pin
Removing the Kickstand
Greensmaster ® eFlex 1021
20248SL Rev C
Be careful when removing or applying tension from or to the torsion
spring of the kickstand.
The spring is under heavy load and may cause personal injury.
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
Figure 88
8. Spacer (2 each)
9. LH torsion spring
10. Spring mount pin
11. Bolt (2 each)
12. Plain washer (2 each)
13. Spring retainer (2 each)
14. Kickstand
CAUTION
FF
Page 6–21 Controls, Wheels, and Accessories : Service and Repairs
position, park the
ISENGAGE
, and remove the key; refer to