Toro Greensmaster eFlex 1021 Service Manual page 156

Disassembling the Handle Assembly (continued)
Assembling the Handle Assembly
Controls, Wheels, and Accessories : Service and Repairs
29. Remove the flange nut (8), and bolt (2) that secure the clutch bail link (5) to
the handle mount (7). Remove the 2 flange bushings (3) and spacer tube
(13) from the handle mount.
30. Remove the flange nut (8) and bolt (2) that secure the clutch bail assembly
(4) to the handle mount (7). Remove the clutch bail assembly from the
handle mount. Remove the compression spring (6), 2 flange bushings (3)
and spacer tube (13) from the handle mount.
31. Remove the 2 nuts (item 9 in
handle mount (7) to the upper receiver weldment (15). Remove the handle
mount from the upper receiver weldment.
g391562
1. Lower handle assembly
2. Bolt (2 each)
3. Anti-rotation washer
32. If necessary, remove the 2 bolts (item 2 in
(3),and washer (4) that secure the lower handle assembly (1) to the frame
assembly (5).
1. If removed, clean the threads of the frame assembly and the 2 bolts (2),
and apply a coat to medium strength thread-locking compound as shown
in Figure 87.
Figure 86) and 2 bolts (11) that secure the
Figure 87
4. Washer
5. Frame assembly
Figure
Page 6–18
87), anti-rotation washer
Greensmaster ® eFlex 1021
20248SL Rev C