Service And Repairs; Electric Motor - Toro Greensmaster eFlex 1021 Service Manual

Service and Repairs

Electric Motor

g339147
1. Frame assembly
2. Transmission gear box assembly
3. Socket head screw (4 each)
Removing the Electric Motor
Greensmaster ® eFlex 1021
20248SL Rev C
4. Motor adaptor
5. Socket head screw (3 each)
6. Closed cell foam seal
Note: A damaged electric motor assembly may cause a #7, #8, #9, or #10 fault
to be generated and displayed on the InfoCenter display. Refer to the
Screen (page 5–15) for information on faults.
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Disconnect the electric motor connections from the machine wire harness.
Figure 67
FF
Disconnecting and Connecting the
5–3).
Page 5–41
7. Key
8. Electric motor
position, park the
ISENGAGE
, and remove the key; refer to
Electrical System: Service and Repairs
Faults