Toro Greensmaster eFlex 1021 Service Manual page 30

Cutting Reel Shim
Toro Part No. 125–5611
Use the 0.05 mm (0.002 in) shim like a feeler gauge to
measure the gap between the reel and the bedknife during
reel adjustment.
Cutting Performance Paper
Toro Part No. 125–5610 (300 strips)
Cutting performance paper is used to test the cutting reel
performance after adjusting the reel to bedknife clearance.
Backlapping Brush Assembly
K Line Part No. 29–9100
For applying lapping compound to cutting units while keeping
hands a safe distance from the rotating reel.
Components for the brush assembly are also available
individually.
Brush 36-4310
Handle 29-9080
Handle cap 2410-18
Spline Adapter Tool
Toro Part No. 120–3221 or 120–3222
Use either part number (current riding Greensmaster cutting
unit reel nut) as a tool to remove and install the spline adapter
on the cutting unit reel.
Specifications and Maintenance: Special Tools Page 2–14 Greensmaster ® eFlex 1021
20248SL Rev C