Toro Greensmaster eFlex 1021 Service Manual page 155

Disassembling the Handle Assembly (continued)
g337168
1. Left bail bracket
2. Bolt (2 each)
3. Flange bushing (4 each)
4. Clutch bail assembly
5. Clutch bail link
6. Compression spring
Greensmaster ® eFlex 1021
20248SL Rev C
25. If necessary, remove the cotter pin (item 18 in
(15) and clevis pin (14) that secure the handle adjuster assembly (22) to the
upper receiver weldment (8).
26. Remove the handle adjuster assembly (Item 22 in
receiver weldment and separate handle torsion spring (23) and spring spacer
(24) from the handle adjuster.
7. Handle mount
8. Flange nut (4 each)
9. Nut (2 each)
10. Upper receiver weldment
11. Bolt (2 each)
12. Flange bushing (2 each)
27. Remove the 2 nuts (item 8 in
handle (16) to handle mount (7), and remove the handle from the clutch
bail assembly and the handle mount.
28. If necessary, remove the 2 screws (14) that secure the left and right bail
brackets (1 and 15) to the handle (16).
Figure 86
13.
14.
15.
16.
17.
Figure 86) and 2 bolts (17) that secure
Page 6–17 Controls, Wheels, and Accessories : Service and Repairs
Figure 84), bearing spacer
Figure 84) from the upper
Spacer (2 each)
Torques-head screw (2 each)
Right bail bracket
Handle
Bolt (2 each)