Toro Greensmaster eFlex 1021 Service Manual page 211

Installing the Gearbox Assembly
g395776
1. Weld side of reel support plate
2. Pry bar
3. Reel shaft
4. Single-lug groomer gearbox
5. 2-lug groomer gearbox
Greensmaster ® eFlex 1021
20248SL Rev C
Refer to Figure 127 for this procedure.
1. Install a 5/16-18 X 5/8 inch square head set screw (Toro Part No.1-803022)
into the end of the drive shaft for the groomer drive gearbox, and tighten the
set screw to 13 N·m (120 in-lb); refer to
Figure 127
6. Square head set screw (Toro Part No.1-803022)
7. Input shaft assembly
8. Shim washer
9. Threads (reel shaft)
Figure
Page 8–13 Universal Groomer (Optional): Service and Repairs
127.