Toro Greensmaster eFlex 1021 Service Manual page 160

Removing the Kickstand (continued)
Installing the Kickstand
Controls, Wheels, and Accessories : Service and Repairs
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Pivot the kickstand up and hold against the frame stops.
4. Remove the bolt (item 2 in
and torsion spring (9) to the kickstand (16).
5. Remove the spring mount pin (10) and torsion spring (9) from the kickstand
(14).
6. Remove the bolt (2), spacer (8) and nut (4) that secures the kickstand (14)
to the frame (3).
7. Remove the kickstand (14) from the frame (3).
8. If necessary, remove the spring retainer (13) by removing the nut (4), washer
(12) and bolt (11).
9. If necessary, remove the spacers (8) from the kickstand (14).
g337280
1. Kickstand (raised)
2. Torsion spring
1. If removed, install the spacers (8) to the kickstand (14).
2. If removed, secure the spring retainer (13) to kickstand with the bolt (11),
washer (12) and nut (4).
3. Secure the kickstand (14) to the frame (3) with the torsion spring (9), spring
mount pin (10) and bolt (2).
4. Secure the kickstand (14) to the frame (3) with spacer (8), bolt (2) and nut (4).
5. Connect the battery pack; refer to
Battery Pack (page
Disconnecting and Connecting the
5–3).
Figure 88) that secures the spring mount pin (10)
Figure 89
3. Kickstand (lowered)
Disconnecting and Connecting the Lithium
5–3).
Page 6–22 Greensmaster ® eFlex 1021
20248SL Rev C