Replacing The Reel Cable - Toro Greensmaster eFlex 1021 Service Manual

Replacing the Reel Cable

g336876
1. Reel cable
2. Jam nut
3. Cable spring
4. Knob
5. Reel lever handle rod
Removing the Reel Cable
Greensmaster ® eFlex 1021
20248SL Rev C
6. V-ring seal
7. Reel lever assembly
8. Cotter pin clip
9. Split bushing
10. Clevis connector
Note: Refer to Figure 80
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
Figure 80
11.
12.
13.
during this procedure.
FF
Disconnecting and Connecting the
5–3).
Page 6–7 Controls, Wheels, and Accessories : Service and Repairs
Clevis pin
Upper receiver weldment
Retaining ring
position, park the
ISENGAGE
, and remove the key; refer to