Toro Greensmaster eFlex 1021 Service Manual page 147

Installing the Reel Cable (continued)
Greensmaster ® eFlex 1021
20248SL Rev C
B. Position the reel cable (4) to the casting slot of the base with a jam nut
(3), flat washer and a lock washer on each side of the slot.
3. Make final adjustment of the reel cable at the reel cable lever assembly.
Adjust the cable jam nuts to remove the slack in the clutch cable.
4. Check and adjust the reel cable; refer to
5. Install the lower cover and control cover to the handle assembly.
6. Connect the battery pack; refer to
Battery Pack (page
Adjusting the Reel Cable (page
Disconnecting and Connecting the Lithium
5–3).
Page 6–9 Controls, Wheels, and Accessories : Service and Repairs
6–3).