Toro Greensmaster eFlex 1021 Service Manual page 162

Removing the Transport Wheel (continued)
Disassembling the Transport Wheel
Controls, Wheels, and Accessories : Service and Repairs
g200276
1. Wheel retaining lever
3. Pivot the wheel retaining lever away from the center of the wheel. Slide the
transport wheel off the wheel hex shaft.
g261682
1. Wheel hex shaft
1. Ensure that the tire is fully deflated before disassembly of the wheel.
2. Remove the 3 bolts and 3 lock washers from the shallow rim and hub.
Remove the hub from the deep rim.
3. Inspect the hub bushing. Replace the bushing, if worn or damaged.
4. Remove the 4 bolts and 4 flange nuts from the deep rim and shallow rim.
Remove the shallow rim from the deep rim.
5. Separate the tire, tube, and deep rim.
6. If necessary, remove the shoulder screws, torsion spring, and retaining lever
from the hub.
Figure 91
Figure 92
Page 6–24 Greensmaster ® eFlex 1021
20248SL Rev C