Toro Greensmaster eFlex 1021 Service Manual page 31

Reel Thread Repair Taps
15/16–16 Right-Hand Thread – Toro Part No. 137–0926
15/16–16 Left-Hand Thread – Toro Part No. 137–0927
Use to clean or repair the internal threads of cutting unit reels.
Angle Indicator and Magnetic Mount
Angle Indicator: Toro Part No. 131-6828
Magnetic Mount: Toro Part No. 131-6829
Because the top grind angle on bedknives is critical for
edge retention, and therefore after− cut appearance, Toro
developed these service tools for accurately measuring the
top grind angle on all bedknives.
Since there can be variations in the mounting surface of the
bedbar, it is necessary to grind the bedknife after installing
it to the bedbar.
1. Place the angle indicator on the bottom side of the
bedknife with the digital display facing you as shown.
2. Press the Alt Zero button on the angle indicator.
3. Remove the angle indicator and place the magnetic mount
on the edge of the bedknife so the face of the magnet is flat
against the top angle of the bedknife.
4. Place the angle indicator on the mount with the digital
display facing you as shown. The angle displayed on the
indicator is the current bedknife top angle.
Greensmaster ® eFlex 1021
20248SL Rev C
1. Bedknife
2. Angle Indicator
1. Angle indicator surface
2. Magnetic mount
3. Bedknife
Page 2–15 Specifications and Maintenance: Special Tools
g223327
Figure 6
3. Bedbar
g223326
Figure 7
4. Bedbar
5. Angle indicator