The Height Adjuster Assembly - Toro Greensmaster eFlex 1021 Service Manual

The Height Adjuster Assembly

Universal Groomer (Optional): Service and Repairs
2-Lug Groomer Gearbox and Idler Plate
g396679
1. Height of cut 7.
screw
2. Plow bolt 8.
3. Height adjuster 9.
knob
4. Screw 10.
5. Detent spring 11.
6. Quick up cover 12.
Note: Early universal groomers used 2 non-adjustable compression springs on
eye bolts for the 2-lug gearbox and idler plate. The single-lug gearbox and idler
plate assemblies are the current groomer drive configuration, and use shim
washers to preload the springs; refer to
Figure 137
Quick up handle 13. Washer 20.6 x
14.3 mm (0.813 x
0.563 inch)
Groomer height of 14. Compression
cut arm spring (inner)
Height of cut 15. Compression
washer spring (outer)
Lock nut 16. Washer 20.6 x
10.3 mm (0.813 x
0.406 inch)
Bumper 17. Serrated-flange
nut
Lock screw 18. Eye bolt
Figure
Page 8–26
19. Adjuster pin
20. 2-lug
groomer-drive
gearbox
21. Cotter pin
137.
Greensmaster
20248SL Rev C
® eFlex 1021