The Height Adjuster Assembly - Toro Greensmaster eFlex 1021 Service Manual

The Height Adjuster Assembly

Universal Groomer (Optional): Service and Repairs
Single-Lug Groomer Gearbox and Idler Plate
g396678
1. Height of cut screw
2. Plow bolt
3. Height adjuster knob
4. Screw
5. Detent spring
6. Quick up cover
7. Quick up handle
8. Groomer height of cut arm
9. Height of cut washer
10. Lock nut
11. Bumper
Note: Early universal groomers used 2 non-adjustable compression springs on
eye bolts for the 2-lug gearbox and idler plate. The single-lug gearbox and idler
plate assemblies are the current groomer drive configuration, and use shim
washers to preload the springs; refer to
Figure 134
12. Washer 20.6 x 14.3 mm (0.813 x 0.563
inch)
13. Lock screw
14. Shim washers
15. Compression spring (inner)
16. Compression spring (outer)
17. Belleville washer
18. Eye bolt
19. Shoulder screw
20. Hardened washer
21. Single-lug groomer gearbox
Figure
Page 8–22
134.
Greensmaster
20248SL Rev C
® eFlex 1021