Toro Greensmaster eFlex 1021 Service Manual page 52

Adjusting the Reel Drive Belt (continued)
Traction and Reel Drive Systems: Adjustments
5. Adjust belt tension as follows:
A. Loosen the nut securing carriage bolt (4) and the idler arm (3), and rotate
the arm to remove tension from the belt (2).
B. Use a beam-style torque wrench to apply 6 to 7 N∙m (55 to 60 in-lb) of
force to the upper idler-arm socket-head screw as shown in
and tighten the nut to secure the carriage bolt (4) and the idler arm (3).
Check the belt tension; refer to step 4.
g391185
1. Upper idler-arm socket-head screw
C. Ensure that the reel drive gasket (5) is in position, and assemble the
reel drive cover (6) to the reel drive housing (1) with the 4 socket head
screws (7).
D. Initially torque the socket head screws to 1.7 to 4.5 N∙m (15 to 40 in-lb).
Then using an alternating pattern torque the screws to 9.6 to 10.7 N∙m
(85 to 95 in-lb).
6. Connect the battery pack; refer to
Battery Pack (page
Figure 13
2. Beam-style torque wrench
Disconnecting and Connecting the Lithium
5–3).
Page 4–4
Figure 13,
Greensmaster ® eFlex 1021
20248SL Rev C