Toro Greensmaster eFlex 1021 Service Manual page 158

Assembling the Handle Assembly (continued)
Controls, Wheels, and Accessories : Service and Repairs
23. Install the clutch and reel drive lever assembly; refer to
Cutting Unit Drive Lever Assembly (page
24. Install the reel cable; refer to
25. Install the brake cable; refer to
26. Install the throttle cable (item 27 in
27. Adjust the traction bail proximity sensor; refer to
Proximity Sensor (page
28. Reposition the wire harness to the bottom control cover ( 26 in
Install the cover to the upper receiver weldment (8) with the 2 screw and
washer assemblies (25), 2 bolts (33) and 2 flange nuts (7).
29. Install the lower handle cover to the handle assembly and secure with the
4 bolts; refer to Figure
30. Install the control cover to the handle assembly and secure with the 4 bolts;
refer to Figure 82.
31. Connect the battery pack; refer to
Battery Pack (page
6–11).
Installing the Reel Cable (page
Installing the Brake Cable (page
Figure
5–20).
82.
Disconnecting and Connecting the Lithium
5–3).
Page 6–20
Assembling the
6–8).
6–5).
84).
Adjusting the Traction Bail
Figure
Greensmaster
20248SL Rev C
84).
® eFlex 1021