Optional) Setting Wifi Parameters - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
----End
Follow-up Procedure
After a USB flash drive has been inserted into the USB port of the main control
board and successfully identified, tap Export File under MIB File to export the
MIB file to the USB flash drive for the customer's use in accessing a third-party
NMS.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.

4.5.5 (Optional) Setting WIFI Parameters

Prerequisites
After connecting the WIFI module of the USB interface to the USB port of the
smart cooling product main control module, WIFI Settings is enabled to be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Figure 4-13 WIFI Setting
Step 2 Set parameters.
Parameter
WiFi SSID
WiFi password
Issue 07 (2021-12-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Description
Set WiFi SSID based on the actual configuration; WiFi
SSID is the name used for the WiFi hotspot over which
a mobile phone can connect to the smart cooling
product.
Enter the WiFi password when you use a mobile phone
to connect to the WiFi. The WiFi has no default
password. When you enable the WiFi function for the
first time, you need to set a password.
4 Power-On Commissioning
115