Optional) Installing Cables For The External Water Valve Actuator - Huawei NetCol8000-C070 User Manual
In-room chilled water smart cooling product
Hide thumbs
Also See for NetCol8000-C070:
- User manual (236 pages) ,
- Quick manual (32 pages) ,
- User manual (221 pages)
Table of Contents
Advertisement
NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 3-45 Connecting communications cables
----End
3.6.5 (Optional) Installing Cables for the External Water Valve
Actuator
Context
●
●
Procedure
Step 1 Route the cables of the water valve actuator through the hole on the unit
according to the route shown in the figure.
Step 2 Connect the cables of the water valve actuator to the specified ports of the unit
based on the mapping.
Issue 07 (2021-12-30)
NO TE
Customers can purchase a switch and NetEco as the monitoring system.
The installation position of the water valve actuator depends on site
requirements. This section describes only the cable connection method and
route.
Before connecting the cable, ensure that the water valve actuator is correctly
installed.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
71
Advertisement
Table of Contents
