Display Module Screen Operations; How Do I Set Lan Parameters - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Step 2 Select Client certificate or Server certificate based on the type of the certificate
in use.
Step 3 Tap Browse next to Upload CA certificate file.
Step 4 Select the CA certificate file to be uploaded.
Step 5 Upload the local certificate file and key file in turn in the same way.
Step 6 Enter Key password and Confirm key password.
Step 7 Tap Submit.
●
●
----End

7.4 Display Module Screen Operations

7.4.1 How Do I Set LAN Parameters?

If the teamwork networking mode is FE networking, set the LAN parameters
based on the actual situation.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > LAN IP Settings, and
set LAN IP assigning mode to Manual. Set LAN IP address, LAN subnet mask,
and LAN gateway based on the actual plan.
Figure 7-12 LAN IP Settings
----End
Issue 07 (2021-12-30)
If files are imported successfully, a success message will be displayed.
If files fail to be imported, a message indicating the cause for failure will be
displayed. Rectify the fault according to the message and import files again.
NO TE
● If the LAN IP address of the unit has not been changed, the LAN IP address of each
unit in the group is reallocated when the Teamwork function is enabled.
● If the LAN IP address of the unit has been changed, the LAN IP address of the unit
remains unchanged when the Teamwork function is enabled.
● The LAN IP address must be in the 192.168.248.X network segment.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
195