Optional) Setting Wifi Parameters - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual (1350 mm Depth)
Follow-up Procedure
After a USB flash drive has been inserted into the USB port of the main control
module and successfully identified, tap Export File under MIB File to export the
MIB file to the USB flash drive for the customer's use in accessing a third-party
NMS.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.

6.5.3.5 (Optional) Setting WiFi Parameters

Connect the mobile phone to the WiFi network and use the mobile phone app for
power-on commissioning and software upgrade.
Prerequisites
After the WiFi module of the USB port is connected to the USB port on the main
control module of the unit, WIFI Settings can be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Figure 6-17 WIFI Setting
Step 2 Set parameters.
Parameter
WiFi SSID
WiFi password
Issue 04 (2022-12-15)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Set WiFi SSID based on the actual configuration; WiFi
SSID is the name used for the WiFi hotspot over which
a mobile phone can connect to the smart cooling
product.
Enter the WiFi password when you use a mobile phone
to connect to the WiFi. The WiFi has no preset
password. When you enable the WiFi function for the
first time, you need to set a password.
6 Power-On Commissioning
132