Clearing The Alarms Related To The Inconsistent Parameter Configuration; Figure 8-6 Mml Commands For Setting The Gbts And Nodeb Parameters; Table 8-1 Alarms Related To The Inconsistent Parameter Configuration - Huawei 3900 Series Solution Manual

3900 Series Base Station GU Co-Cabinet
Solution Guide

Figure 8-6 MML commands for setting the GBTS and NodeB parameters

5.
8.2.2 Clearing the Alarms Related to the Inconsistent Parameter
Configuration
This describes how to clear the alarms related to the inconsistent parameter configuration.
When the alarms listed in
configuration alarm is also reported.
l
l
Table 8-1

Table 8-1 Alarms related to the inconsistent parameter configuration

Board
Type
APM30
Issue 04 (2009-07-30)
NOTE
If the GBTS parameters (switch parameters not included) cannot be set, set the corresponding
l
NodeB parameter to the default value.
If the NodeB parameters cannot be set, set the corresponding GBTS parameter to the default
l
value.
Check whether the alarm is cleared. If the alarm persists, contact Huawei Customer Service
Center.
Table 8-1
If the inconsistent parameter configuration alarm is reported, clear it according to
Clearing the Inconsistent Parameter Configuration
alarms listed in Table 8-1
alarms according to the Alarm Handling section of the BSS Help System.
If the inconsistent parameter configuration alarm is not reported, clear the alarms listed in
Table 8-1 according to the Alarm Handling section of the BSS Help System directly.
lists the alarms related to the inconsistent parameter configuration.
GSM NodeB
Board Board
APMU NPMU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
are reported, check whether the inconsistent parameter
are cleared. If the alarms listed in
GBTS NodeB
Alarm Alarm
Alarm Alarm
reported reported
from from
port 0 port 5
8 Operation and Maintenance
Alarm. Then, check whether the
Table 8-1 persist, clear the
GBTS NodeB
Alarm Alarm
ID ID
Customi Customi
zed zed
8.2.1
Remark
s
-
8-7