Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Step 6 Tap Next Page.
Step 7 Set SNMP trap parameters.
1.
2.
3.
4.
----End
Follow-up Procedure
After a USB flash drive has been inserted into the USB port of the main control
module and successfully identified, tap Export File under MIB File to export the
MIB file to the USB flash drive for the customer's use in accessing a third-party
NMS.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
6.4.3 (Optional) Setting WiFi Parameters
Connect the mobile phone to the WiFi network and use the mobile phone app for
power-on commissioning and software upgrade.
Prerequisites
After the WiFi module of the USB port is connected to the USB port on the main
control module of the unit, WIFI Settings can be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Figure 6-8 WIFI Setting
Issue 04 (2022-06-30)
Tap Add under SNMP Trap.
Set Trap Address as planned and Trap Port to the actual port number.
NO TE
Trap Port is set to null by default.
Select SNMP Version. If an SNMPv3 user is configured, it is recommended
that SNMP Version be set to SNMPv3.
If SNMP Version is set to SNMPv3, you need to select SNMPv3 User Name.
For other protocols, you need to set Trap Community.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 Power-On and Commissioning
89
Advertisement
Table of Contents
