Setting Parameters; Setting T/H Sensor Parameters - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual

4.5 Setting Parameters

4.5.1 Setting T/H Sensor Parameters

Prerequisites
●
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H sensor. The screen
shown in
Figure 4-3 T/H Sensor
Step 2 Set Return air sensor 2 to Enable.
Step 3 Set the temperature and humidity parameters by referring to
Issue 07 (2021-12-30)
Checks the model, manufacturer, monitoring version, detail version
information, and electronic label of the display module.
If T/H sensors outside cabinets have been deployed in the aisle, enable the
sensors. Otherwise, skip
If you need to enable a humidity and temperature sensor, log in as the admin
user.
This section describes how to enable Return air sensor 2.
Figure 4-3 is displayed.
NO TE
You are not recommended to modify the parameters not listed in
Copyright © Huawei Technologies Co., Ltd.
Step 2.
4 Power-On Commissioning
Table 4-4.
Table 4-4.
100