Huawei NetCol8000-C070 User Manual page 243

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Menu
Issue 07 (2021-12-30)
Name
Direct free-
cooling
Temperature and
humidity control
type
Temperature
setpoint
Copyright © Huawei Technologies Co., Ltd.
Parameter Description
Set the parameters for the
direct free-cooling plenum
based on the actual
configurations of the
customer's direct free-
cooling module onsite and
the enabling and disabling
requirements of the direct
free-cooling function.
Cold aisle, Hot aisle,
Return air, or Supply air
can be set as required. The
temperature and humidity
set points correspond to
the selected control type
can be set.
After the temperature and
humidity control type and
the temperature value
under this type are set, the
device performs cooling or
heating based on the
settings.
E Parameter Description
Default Value
● There is no
direct free-
cooling
function by
default.
Select No
when no
direct free-
cooling
plenum is
configured.
● Select
Enable
when a
direct free-
cooling
plenum is
configured
and needs
to be
enabled.
● Select
Disable
when a
direct free-
cooling
plenum is
configured
but need
not be
enabled.
Supply air
22.0°C
233