Huawei NetCol8000-C070 User Manual page 130

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 4-18 Generating a startup password
Step 4 On the Offline Activation screen, enter Bar code and Verification code, which
are available on the home screen of the display module as shown in
Tap Generate PWD to generate a startup password.
Step 5 Tap Password on the home screen of the display module and enter the generated
startup password in the displayed dialog box.
----End
Online Boot
Step 1 Insert the WiFi module to the USB port on the main control board.
Step 2 Choose Settings > Comm Settings > WIFI Settings on the home screen of the
display module. Then set WiFi parameters and enable the WiFi function.
Step 3 Connect the mobile phone to the smart cooling product WiFi and ensure proper
communications between the mobile phone app and the smart cooling product.
Step 4 Open the Service Expert app.
Step 5 Tap StartUp on the home screen of the app and the screen shown in
is displayed.
Issue 07 (2021-12-30)
NO TE
Tap and scan the QR code on the Start Password screen of the display module. The
barcode and verification code are automatically entered on the app.
NO TE
If startup verification fails (when you do not enter the password within 5 min or the
password you enter is incorrect), the generated password will be invalid for the sake of
security. The initial startup verification fails, you need to generate a new startup password.
Copyright © Huawei Technologies Co., Ltd.
4 Power-On Commissioning
Figure 4-16.
Figure 4-19
120