Huawei NetCol8000-C070 User Manual page 124

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
3.
4.
5.
Step 5 Tap the text box after SNMP Port, as shown in
actual port number, tap
Figure 4-12 Setting the SNMP port
Step 6 Tap Next Page.
Step 7 Set SNMP trap parameters.
1.
2.
3.
4.
Issue 07 (2021-12-30)
NO TICE
Passwords of an authentication protocol and proprietary protocol must
comply with the following policies:
– The password must contain at least two types of characters among
uppercase letters (A–Z), lowercase letters (a–z), and digits (0–9). The
password must contain 8 to 15 characters and be different from the user
name or its reverse.
– A password must not be a string containing duplicate sections, such as
12a12a12a.
– Week passwords such as Password, Admin_1243, and Changeme_123 are
not allowed.
Set SHA Password and Confirm Password as planned.
Set AES Password and Confirm Password as planned.
Tap Submit.
NO TE
SNMP Port is set to 161 by default.
Tap Add under SNMP Trap.
Set Trap Address as planned and Trap Port to the actual port number.
NO TE
Trap Port is set to null by default.
Select SNMP Version. If an SNMPv3 user is configured, it is recommended
that SNMP Version be set to SNMPv3.
If SNMP Version is set to SNMPv3, you need to select SNMPv3 User Name.
For other protocols, you need to set Trap Community.
Copyright © Huawei Technologies Co., Ltd.
Figure
, and then tap Submit.
4 Power-On Commissioning
4-12. Set SNMP Port to the
114