Setting Neteco Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
----End

6.14.1.2 Setting NetEco Parameters

When the smart module can be connected to the NetEco, perform the following steps to
configure parameters.
Procedure
Step 1 Apply for a fixed IP address to the equipment room network administrator.
Step 2 Set the IP address, subnet mask, and default gateway on the ECC800-Pro WebUI.
Table 6-46 IP parameters
Path
System
Settings >
System
Parameters
> Monitor
IP >
WAN_1
Step 3 Click Submit.
Step 4 Set NetEco communications parameters and authentication password on the ECC800-Pro
WebUI.
Table 6-47 NetEco parameters
Path
System
Settings >
NMS
Application >
NetEco >
Communicati
on
Parameters
Issue 06 (2020-04-22)
Parameter Default
Value
IP 192.168.8.10
Subnet mask 255.255.255.
0
Default 192.168.8.1
gateway
Default
Parameter
Value
NetEco Local
Location
Server IP 192.168.8.1
1
Port number 31220
Network IP for WAN_1
Copyright © Huawei Technologies Co., Ltd.
Setting
Set this parameter based on the IP address
assigned by the network administrator.
Set this parameter based on the subnet mask
assigned by the network administrator.
Set this parameter based on the default
gateway address assigned by the network
administrator.
Setting
Set this parameter based on the type of
the connected NetEco management
system.
Local: NetEco
Cloud: CloudOpera NetEco
IP address of the primary NetEco server
NOTE
The NetEco IP address and the ECC800-Pro
IP address must be configured in the same
network to ensure normal connection
between the NetEco and the ECC800-Pro.
31220
WAN_1 or WAN_2
6 Feature Description
202