Huawei ECC800 User Manual page 137

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
3.
4.
Issue 06 (2020-04-22)
Figure 6-4 Set Authentication Mode
 If the access actuator version is V139 or later, the access actuator supports the authentication mode
by card, password, or fingerprint.
To query the access actuator version, choose Maintenance > Version Information. View the
version in the Device Version list.
 If you set the authorization mode to Combination, for example, card, password and fingerprint,
you need to first swipe your card, enter the password, press the pound key (#), and then enter the
fingerprint. The door can be opened only after verification of all the three items is successful.

If you set the authorization mode to Card, Password or Fingerprint, when you use the password to
enable the access control, enter the password in the format of user ID*password#. If you enter an
incorrect password or user ID, press * on the keyboard of the access controller to stop the
authentication process. Then, enter user ID*password#.
To query the user ID, log in to the ECC800-Pro WebUI as an administrator. Choose System
Settings > Access Management. In the Authorization area, view the user ID corresponding to the
user name.
Select the configured access actuator and click OK to complete setting the authorization
mode.
On the Authorization Operations tab page, click Add to access the new user page. On
the Basic Info tab page, enter User name and Employee ID.
Specify the following information on the Password tab.
− Password: Enter and confirm the password.
− Card number: The card number can be recorded directly or by swiping the card.
 Record directly: Type the access card number in the text box.
 Record by swiping the card: Click Swipe Card and place the card on the
access control device. The card number is automatically recorded.
− Fingerprint: On the Fingerprint tab page, select Fingerprint for Select fingerprint
reader and click Scan Fingerprint. On the Please collect fingerprint page, click
OK. Then put your finger on the fingerprint reader to collect the fingerprint after
hearing the voice prompt. After you hear a beep sound, move your finger away and
collect the fingerprint again.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
126