Remote Management; Neteco Management; Connecting A Communications Cable; Setting Neteco Parameters - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Procedure
Step 1 Connect the PAD to the WiFi network of the ECC800-Pro in the room.
Step 2 Log in to the FusionModule app on the pad as an administrator.
Step 3 On the app home screen, tap
Account Management.
Table 6-50 Facial recognition management functions
Operation
Tap
Tap
Step 4 Tap OK.
----End

6.14 Remote Management

6.14.1 NetEco Management

6.14.1.1 Connecting a Communications Cable

Procedure
Step 1 Connect a communications cable to the WAN1 port on the ECC800-Pro.
Figure 6-83 Connecting a communications cable
----End

6.14.1.2 Setting NetEco Parameters

When the smart module can be connected to the NetEco, perform the following
steps to configure parameters.
Issue 02 (2020-09-07)
.
.
Copyright © Huawei Technologies Co., Ltd.
. On the displayed Settings screen, select Face
Purpose
Modify the access actuator associated
with the user.
Delete the facial data.
6 Feature Description
235