Huawei ECC800 User Manual page 4

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Symbol
Change History
Changes between document issues are cumulative. The latest document issue contains all
updates made in previous issues.
Issue 06 (2020-04-22)
Added sections about C20 lithium batteries, 5G DC power supply, and
NetCol5000-A035/A050 access.
Issue 05 (2020-03-30)




Issue 04 (2020-01-20)
Updated the UI texts of the UIM20A expansion module.
Issue 03 (2019-12-20)
Added UIM20A expansion module.
Issue 02 (2019-12-06)


Issue 01 (2019-07-20)
This issue is the first official release.
Issue 06 (2020-04-22)
Description
Indicates a hazard with a low level of risk which, if not avoided,
could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal injury.
Supplements the important information in the main text.
NOTE is used to address information not related to personal injury,
equipment damage, and environment deterioration.
Added the scenario where the door status sensor connects to the FusionModule500 of the
ECC800-Pro.
Added section "Infrared Remote Control Module."
Added the requirements for wireless mode and frequency bands in 4G technical
specifications.
Added the method of handling the problem that the ECC800 IP address is forgotten.
Added device connection and linkage operations in the FusionModule800 scenario.
Optimized sections about commissioning cameras.
Copyright © Huawei Technologies Co., Ltd.
About This Document
iii