Huawei ECC800 User Manual page 107

ECC800 Data Center Controller
User Manual (for ECC800-Pro)

Procedure
Step 1 Authenticate the startup password on the WebUI.
1.
2.
3.
Step 2 Use the Service Expert app to authenticate the startup password.
1.
2.
3.
Issue 06 (2020-04-22)
When the system type is changed to FusionModule800, the startup password needs to be
authenticated again.
Log in to the ECC800-Pro WebUI as an administrator.
Record the values of Barcode and Verify Code in the displayed Startup Password
dialog box.
Within 24 hours, inform Huawei technical support of Barcode and Verify Code to
obtain the password. After obtaining the password, enter the password in the Password
text box and click Submit to complete the authentication of the startup password.
The verification code is valid for 24 hours by default. After the validity period expires, the verification
code is automatically updated. You can also click to update the verification code.
Download and obtain the app installation package.
Log in to Huawei AppGallery (https://a.vmall.com/), search for Service Expert, and
tap Download to obtain the installation package.
a. Open the browser on the pad, enter
Huawei AppGallery, select Ordinary Download, and tap Save.
b. Install the Huawei AppGallery. If the downloaded file exists in the drop-down list
box, tap the file to install the Huawei AppGallery. If the downloaded file does not
exist in the drop-down list box, choose File > Local on the desktop, find the
Download folder, and tap the Huawei AppGallery installation package.
Install the app.
By default, the Android operating system forbids the installation of apps not obtained
from the Android market. Therefore, before installing the app, set the mobile phone so
that it allows the installation of apps from unknown sources.
Tap the app installation file for installation. After the installation is complete, check that
the app icon
Hold down the SW button on the ECC800-Pro for less than 3s to enable the WiFi
function.
 The initial password is Changeme after WiFi is enabled. The initial password is valid only when
you press the button for the first time to enable WiFi after delivery. If you enable WiFi on the WebUI,
there is no default password.
 After the WiFi function is enabled, the password for a mobile phone to connect to the WiFi network
is Changeme. When you log in to the app using a pad, the system prompts you to change the
password.
 After you disable the WiFi hotspot function on the WebUI and press the button again, the WiFi
function is still enabled. In this case, the WiFi password is the one you changed last time.
 The WiFi function is disabled by default. If you need to enable the WiFi function, change the WiFi
password to ensure connection security.
 If a password is used for a long time, it may be stolen or cracked. The longer it is used, the higher
the risk of theft and cracking. Change the WiFi password once half a year.
Copyright © Huawei Technologies Co., Ltd.
www.baidu.com
is displayed on the home screen of the mobile phone or pad.
5 Power-On Commissioning
in the address box, search for
96