Huawei ECC800 User Manual page 112

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 4 Add a mobile number to receive event notifications.
Figure 5-6 Adding a mobile number
Step 5 Set the alarm notification delay parameter and the new alarm notification parameter.
Issue 06 (2020-04-22)
Click Test to check whether the added mailbox is available. If it is available, Successfully to send the
test email. is displayed. If it is unavailable, Failed to send the test email. is displayed. Check whether
the receiver's mailbox parameters for receiving emails are correctly set.
The mobile phone number is used only for configuring the SMS function and is not used for other
purposes. The phone number is encrypted during transmission in the ECC800-Pro to ensure that the
personal data of users is fully protected.
Click Test to check whether the added mobile phone number is available. If it is available, Successfully
to send the test short message. is displayed. If it is unavailable, Failed to send the test short message.
is displayed. Check whether the receiver's mobile phone parameters for receiving short messages are
correctly set.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
101