Huawei ECC800 User Manual page 273

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Prerequisites
Cables have been connected to the NTC, T/H sensor, and UIM20A expansion module.
Figure 8-20 Wiring diagram
(1) UIM20A expansion module
Procedure
Step 1 The NTC port on the T/H sensor connected to the temperature sensor supports automatic
identification. Therefore, you do not need to set parameters.
Step 2 Add the T/H sensor.
1.
2.
Step 3 Check the monitoring functions of the temperature sensor.
Table 8-30 Function check
Check Method
Issue 06 (2020-04-22)
Log in to the ECC800-Pro WebUI as an administrator.
Add the T/H sensor.
Choose System Settings > Device Management and click Auto Discover Device to add
the T/H sensor. The device connection information is displayed.
Figure 8-21 Device connection
Copyright © Huawei Technologies Co., Ltd.
(2) T/H sensor
Normal Connection Status
8 FAQ
(3) NTC sensor
262